Cabinet Cost Guide

Cabinet costs vary by size, construction, material, finish and installation. Use the calculator for an initial planning range, then request itemized local quotes.

Cabinet cost guide

Answer a few questions to see a planning price range. Your estimate appears before we ask for any contact information.

Where is your project located?ZIP Code

Your location helps us estimate regional installation and labor costs.

What type of cabinet project is this?

Choose the option that best describes what you're planning. This helps us estimate demolition, installation and project complexity.

New ConstructionStarting with an unfinished kitchenNo existing cabinets to removeCabinets are being installed in a new home, addition or space that does not currently have kitchen cabinetry.Typical scope: Cabinet installation with little or no cabinet demolitionFull Kitchen RemodelReplacing cabinets and redesigning the kitchenMost extensive projectYou’re replacing the existing cabinetry and may also change the layout, appliances, island, plumbing, electrical or other parts of the kitchen.Typical scope: Demolition + new cabinets + more installation complexityReplace Existing CabinetsNew cabinets in roughly the same layoutSame or similar footprintYou’re removing the existing cabinets and replacing them with new ones while keeping most cabinet locations and the overall kitchen layout similar.Typical scope: Remove old cabinets + install replacementsAdd or Expand CabinetsAdd storage to your current kitchenAddition / expansionYou’re keeping most of your current kitchen and adding cabinetry such as an island, pantry, beverage area or additional wall cabinets.Typical scope: New cabinets added to an existing spaceCabinet RefacingKeep the cabinet boxes, update the exteriorKeep existing cabinet boxesYou’re keeping the existing cabinet boxes and updating the visible surfaces with new doors, drawer fronts, veneers or finishes.Typical scope: Less demolition and installation than full cabinet replacement

Not sure which project type fits? Compare what is typically included in each project type.

View Project Type Guide

Project Type	Existing Cabinets Removed?	Layout Changes?	New Cabinets?	Typical Complexity
New Construction	No	New layout	Yes	Moderate
Full Kitchen Remodel	Yes	Often	Yes	Highest
Replace Existing Cabinets	Yes	Minimal	Yes	Moderate
Add or Expand Cabinets	Usually no	Limited	Yes, partial	Lower–Moderate
Cabinet Refacing	No	No	No new boxes	Lower

Actual project scope may vary. Choose the closest match for estimating purposes.

What level of cabinetry are you considering?

Choose the option that best matches the quality, customization and design flexibility you want. Not sure? We'll help estimate it for you.

Value / RTAReady-to-assembleBest valueStylish, affordable cabinets delivered ready for assembly. Great for DIY or budget-focused projects.Standard sizes • Limited options • Lowest costStock CabinetsPre-made standard sizesAffordable & convenientFactory-built cabinets available in standard sizes, styles and finishes. A great choice for many remodels.Standard sizes • More finish options • Good valueSemi-CustomMore sizes & design choicesMost popular upgradeMore flexibility in sizing, finishes, storage features and decorative details. Tailor the look and function to your space.Expanded sizes • More finishes • Storage upgradesCustom CabinetsBuilt specifically for your spaceMaximum flexibilityCabinets built to your specifications. Choose the size, style and configuration for your layout.Any size • Premium finishes • Fully personalizedNot Sure Yet?We'll estimate it for youNo problemAnswer the remaining project questions and we'll use a blended cabinet cost range based on your selections. You can refine this later.Blended estimate • No pressure • Change anytime

Not sure what the difference is? Compare cabinet levels, features and typical relative cost.

View Comparison Guide

Feature	Value / RTA	Stock	Semi-Custom	Custom
Relative cost	$	$$	$$$	$$$$
Standard sizes	Yes	Yes	Yes	Built to fit
Size modifications	Very limited	Limited	Many	Maximum
Finish choices	Limited	Moderate	Extensive	Virtually unlimited
Storage options	Basic	Moderate	Extensive	Fully customized
Typical lead time	Shorter	Short	Moderate	Longest

Learn more about cabinet types

What cabinet finish or material are you considering?

Choose the option that best matches the look, material and budget you want. Not sure? We'll use a general planning allowance.

Laminate / ThermofoilBudget-friendly, easy-care finishA smooth, easy-care cabinet surface made by applying a durable decorative layer over an engineered-wood core. A practical value option for straightforward kitchens.$Best for: Budget projects, rentals and simple remodelsGood to know: Easy to clean • Consistent finish • Limited repairabilityPainted MDFSmooth painted engineered woodAn engineered-wood cabinet material with a very smooth painted surface. It is especially popular for clean white, gray and other solid-color finishes.$$Best for: Painted shaker, transitional and modern kitchensGood to know: Very smooth paint finish • Stable surface • No natural wood grainPainted WoodReal wood with a painted finishReal wood cabinet doors and components finished with paint. This provides the look of painted cabinetry with the feel and construction of natural wood beneath the finish.$$$Best for: Higher-quality painted kitchensGood to know: Real wood construction • Premium painted look • Natural wood movement may show at joints over timeCommon examples: Maple • Poplar • BirchStained WoodReal wood with visible grainReal wood cabinetry finished with stain so the natural grain and character remain visible. Stain can range from light and natural to rich, dark tones.$$$Best for: Traditional, transitional and warm natural kitchensGood to know: Visible grain • Natural variation • Warm, authentic appearanceCommon examples: Oak • Maple • Cherry • Alder • HickoryNatural HardwoodReal wood with a clear or natural finishHardwood cabinetry finished to highlight the wood’s natural color, grain and variation rather than covering it with paint or a dark stain.$$$–$$$$Best for: Higher-end kitchens where the wood itself is part of the designGood to know: Authentic wood character • Natural variation • Timeless appearanceCommon examples: White Oak • Red Oak • Maple • Cherry • HickoryPremium / Exotic WoodDistinctive wood species and high-end finishesPremium wood species selected for distinctive grain, color, rarity or architectural character. These options are typically used in custom and luxury cabinetry.$$$$Best for: Luxury kitchens, statement cabinetry and highly personalized designsGood to know: Distinctive grain • Premium appearance • Highest material costCommon examples: Walnut • Rift-Cut or Quarter-Sawn White Oak • Cherry • Mahogany • Teak • ZebrawoodNot Sure Yet?We’ll estimate it for youIf you are not sure which finish or material you want, we’ll use a general cabinet-cost planning range based on the rest of your project. You can refine the selection later.$$–$$$Best for: Early-stage planningGood to know: Planning estimate • No pressure • Change anytime

Not sure what the difference is? Compare cabinet finishes, wood types and typical relative costs.

View Comparison Guide

Option	Material / Look	Common Examples	Relative Cost	Best For
Laminate / Thermofoil	Smooth manufactured surface	MDF/core with applied finish	$	Budget projects
Painted MDF	Smooth painted engineered wood	MDF	$$	Painted shaker or modern
Painted Wood	Painted real wood	Maple, Poplar, Birch	$$$	Higher-end painted kitchens
Stained Wood	Real wood with visible stained grain	Oak, Maple, Cherry, Alder, Hickory	$$$	Warm or classic kitchens
Natural Hardwood	Clear or natural finished hardwood	White Oak, Red Oak, Maple, Cherry, Hickory	$$$–$$$$	Premium natural wood
Premium / Exotic Wood	Distinctive premium or specialty species	Walnut, Rift White Oak, Mahogany, Teak, Zebrawood	$$$$	Luxury or custom kitchens

Wood species and finish availability vary by cabinet manufacturer and product line. Examples explain the category and do not indicate that every species is available in every CabinetSupply cabinet line.

Your Cabinet Estimate Report

Your Estimated Cabinet Project Cost

Estimate shown before any lead form. No obligation.

Cost Breakdown

Estimated cost range by category

Your Project Selections

Here's what we used to calculate your estimate.

What's Driving Your Estimate

Key factors that influence your cost.

Estimate Confidence

This is a planning estimate, not a quote. Final cabinet pricing depends on exact measurements, configuration, finish, delivery, installation and local conditions. Countertops, appliances, taxes and design fees are not included.

Learn how to compare cabinet quotes →

Refine My Project →

Save Your Estimate & Explore Next Steps

Email your estimate and choose whether to hear from local cabinet professionals.

Would you like to speak with local cabinet providers?

Get matched with participating professionals who can review your project and provide personalized quotes.

Next Steps

Compare Cabinet StylesReview the doors and details that fit your room.Explore MaterialsUnderstand common cabinet finishes and construction.Find Local ProsCompare professionals who serve your area.

Ready to Talk to a Pro?

Get matched with local cabinet professionals who can review your project and provide next-step guidance.

Cabinet Cost Per Linear Foot

Use the calculator above to build a planning range from your linear feet, cabinet class, design choices and installation needs. The starting rates below are editable planning assumptions and vary with the actual project.

RTA Cabinet Costs

Starting cabinetry range: $90–$180 per linear foot before design details and installation.

Stock Cabinet Costs

Starting cabinetry range: $100–$220 per linear foot before design details and installation.

Semi Custom Cabinet Costs

Starting cabinetry range: $180–$400 per linear foot before design details and installation.

Custom Cabinet Costs

Starting cabinetry range: $350–$900 per linear foot before design details and installation.

Cabinet Installation Costs

Installation depends on cabinet class, layout, project size and local labor conditions. The calculator applies a minimum installation allowance.

Cabinet Refacing Costs

Refacing uses a separate installed planning range of $150–$450 per linear foot before local labor adjustment.

What Affects Cabinet Prices?

Cabinet construction, door style, height, finish, layout, removal and labor needs can all change the final cost.

How CabinetSupply Estimates Cabinet Costs

We calculate low and high cabinetry, installation and removal allowances separately, then round the results into a planning range. Broad regional labor factors apply unless a ZIP override is configured. Assumptions last updated 2026-09-28.

Cabinet Cost FAQ

How much do kitchen cabinets cost per linear foot?

Our starting cabinetry ranges run from $90–$180 per linear foot for RTA to $350–$900 for custom, before installation and design details.

What is included in the cabinet estimate?

The range includes cabinetry and, when selected, installation and existing cabinet removal. Refacing uses a separate installed price model.

Why does my location affect the estimate?

Local labor costs vary. We use your ZIP to apply an available ZIP factor or a broad regional planning factor to installation labor.

Are countertops included?

No. Countertops need a separate estimate.

Are appliances included?

No. Appliances are outside this cabinet budget.

Is this a final cabinet quote?

No. A provider must review measurements, selections and site conditions for a quote.

How can I get a more accurate estimate?

Use the project design tool to add measurements and selections, then request itemized local quotes.

Can CabinetSupply email my estimate?

Yes. Email delivery is optional after the estimate appears.

Can I connect with local cabinet providers?

Yes. After viewing your estimate, you can request provider contact or search the directory yourself.